高功率窄脉宽半导体激光激励器设计

为了获得高功率窄脉宽半导体激光,设计了半导体激光器相应的激励单元,论述MOSFET作为高速开关的工作机理,分析基于MOSFET作为高速开关产生窄的大电流脉冲的电路模型.为了使MOSFET开关速度尽可能快,根据前述分析,提出推挽式MOSFET栅极驱动方式并设计了触发窄脉冲的发生电路.当激光二极管接入放电回路时,实验表明:激光二极管输出光的峰值功率可达67.5 W,脉宽约为20 ns.最后,简要分析了影响光脉冲宽度的因素.     

利用DSP底层结构提高MPEG-4编码的实时性

由于利用TMS320C6000系列的DSP底层结构可以提高图像压缩的实时性,本文在TMS320C6416平台上针对DSP底层结构对MPEG-4视频编码进行了优化,包括对8个运算单元能并行执行的特性进行汇编。针对DSP芯片两级高速缓存的工作特点,对编码器中代码和数据所占用的内存空间进行优化。利用EDMA级联特性在内存开辟双缓冲区,同时完成视频数据编码和传输的工作,从而有效地改善编码效率。实验结果表明：该编码器可以对512 pixel×512 pixel大小的灰度图像,以30 frame/s帧频进行压缩,实现了对视频图像的实时编码。     

EXISTENCE AND MULTIPLICITY OF POSITIVE SOLUTIONS TO THIRD-ORDER PERIODIC BOUNDARY VALUE PROBLEM

The existence and multiplicity of positive solutions to a periodic boundary value problem for nonlinear third-order ordinary differential equation are established, based on the zero point theorem concerning cone expansion and compression of order type. Our main approach is different from the previous papers on the existence of multiple positive solutions to the similar problem.     

Artificial neural network prediction to the hot compressive deformation behavior of Al–Cu–Mg–Ag heat-resistant aluminum alloy

The behavior of the flow stress of Al-Cu-Mg-Ag heat-resistant aluminum alloys during hot compression deformation was studied by thermal simulation test. The temperature and the strain rate during hot compression were 340-500 °C, 0.001 s⁻¹ to 10 s⁻¹, respectively. Constitutive equations and an artificial neural network (ANN) model were developed for the analysis and simulation of the flow behavior of the Al-Cu-Mg-Ag alloys. The inputs of the model are temperature, strain rate and strain. The output of the model is the flow stress. Comparison between constitutive equations and ANN results shows that ANN model has a better prediction power than the constitutive equations.     

A Pressure‐Induced Inverse Order–Disorder Transition in Double Perovskites

Given the consensus that pressure improves cation ordering in most of known materials, a discovery of pressure‐induced disordering could require recognition of an order–disorder transition in solid‐state physics/chemistry and geophysics. Double perovskites Y₂CoIrO₆ and Y₂CoRuO₆ polymorphs synthesized at 0, 6, and 15 GPa show B‐site ordering, partial ordering, and disordering, respectively, accompanied by lattice compression and crystal structure alteration from monoclinic to orthorhombic symmetry. Correspondingly, the long‐range ferrimagnetic ordering in the B‐site ordered samples are gradually overwhelmed by B‐site disorder. Theoretical calculations suggest that unusual unit‐cell compressions under external pressures unexpectedly stabilize the disordered phases of Y₂CoIrO₆ and Y₂CoRuO₆.     

可控空心光束在单轴晶体中的传输特性

基于光束在各向异性单轴介质中的傍轴矢量传输理论,对可控空心光束(CDHB)在单轴晶体中的传输特性作了研究.得出该光束在单轴晶体中传输的横向慢变振幅的表达式,并利用此表达式作数值计算,研究了CDHB在单轴晶体中的传输特性.研究表明,可控空心光束在单轴晶体中传输时,控制参数ξ和光束阶数N的取值对其光强分布有较大的影响.随着...     

三类构型激光脉冲压缩器光栅拼接误差容限比较

建立了包含拼接光栅的三类典型构型(双程Z型、X型及菱型)激光脉冲压缩器的理论模型. 利用光线追迹法计算压缩器引入的相位变化,结合傅里叶变换的方法仿真分析并比较了各压缩器相应的光栅拼接误差容限. 以远场焦斑峰值能量下降到理想值的0.9倍为限确定了三类压缩器光栅拼接误差容限,明确了不同构型激光脉冲压缩器对拼接误差的敏感程度. 这对脉冲压缩器的选型和设计具有指导意义. 关键词： 光栅拼接 脉冲压缩 误差容限 光线追迹     

利用电光相位调制和交叉相位调制制作时间透镜的实验及仿真分析

对时间成像理论进行简要研究. 利用电光相位调制器进行光脉冲压缩实验,并分别对基于电光相位调制和交叉相位调制的时间透镜组成的时间成像系统进行了仿真和讨论. 实验结果表明,基于电光相位调制的时间透镜组成的时间成像系统可以有效压缩光脉冲,但是该系统受到了孔径限制,压缩系数较小,分辨率较低. 进一步的仿真分析结果表明,基于交叉相位调制的时间透镜组成的时间成像系统不受孔径限制,能够获得更大的压缩系数和更高的分辨率,但是该系统的实现难度较大. 关键词： 光脉冲压缩 时间透镜 电光相位调制 交叉相位调制     

双轴压缩下颗粒物质剪切带的形成与发展

本文采用离散元方法,研究了双轴压缩的颗粒体系在刚性边界约束下,局部剪切带的形成和发展过程,注重分析了细观的体积分数、配位数、颗粒旋转角度等参数以及力链结构形态的演变.并从颗粒体系jamming 相图中J点附近的边壁压强和配位数随体积分数的标度规律出发,分析了剪切带内外的体积分数和配位数的变化.结果表明:剪切带形成于颗粒体系的塑性变形开始阶段,此时体系发生剪胀,颗粒体积分数减小,颗粒体系抵抗旋转的能力降低,开始出现细小剪切带,随着轴向应变的继续,细小剪切带发生连接,最终导致贯穿性优势剪切带形成 关键词： 颗粒物质 力链 双轴压缩 剪切带